How to change Camera and Target on the current view

Using the VIEW command in AutoCAD opens up the View Manager and there are properties like Camera X, Camera Y, Camera Z, Target X, Target Y, Target Z that are greyed out so you can't edit them.

In BricsCAD these can easily be edited though.

Here is a tips on how to change these coordinates using the DVIEW command I AutoCAD.

Command:
DVIEW
Select objects or <use DVIEWBLOCK>:     <- press Enter here
Enter option
[CAmera/TArget/Distance/POints/PAn/Zoom/TWist/CLip/Hide/Off/Undo]: PO
Specify target point <30000.76, -16728.59, 2587.63>: 0,0,0
Specify camera point <30000.76, -16728.59, 2588.63>: 0,0,1
Enter option
[CAmera/TArget/Distance/POints/PAn/Zoom/TWist/CLip/Hide/Off/Undo]:     <- press Enter here
Regenerating model.

Or using AutoLISP (command "._DVIEW" "" "_PO" "0,0,0" "0,0,1" "")

In some older AutoCAD versions the above does not work due to an AutoCAD bug, as seen here:

Command: _DVIEW
Select objects or <use DVIEWBLOCK>:
Enter option
[CAmera/TArget/Distance/POints/PAn/Zoom/TWist/CLip/Hide/Off/Undo]: _PO
Specify target point <114577.93, 19107.27, 4087.49>: 0,0,0
Specify camera point <114576.93, 19106.27, 4088.49>: 0,0,1
Camera and Target may not be coincident

I found that this variant did work as it should.

(command "._DVIEW" "" "_PO" (list 0 0 0) (list 0 0 1) "")